Product Description
I.Introduction:
SV-2LB Filter Semiautomatic Smoke Meter, which is produced according to the national standard GB/T11798.5-2001 and GB3847-83, can be used to detect the smoke level of diesel car ,the combustion analysis and the research of diesel engine.
The instrument cramps out a definite store of exhaust from vent-pipe and get them through a certain area of filter paper. Then you can have the test result of exhaust concentration by the black granule on the filter paper (unit: Rb ).
SV-2LB, equipped with Nixie tube, is easy to operate by "Prompt lamp" and separately displays the lasted three test result and the average of them.
Addition: The strong point of SV-2LB: Air compression is not needed while it works
II.Main Technical Parameter:
1.Measurement scope: 0-10 Rb
2.accuracy: Not exceed FS ±3%
3.Repeatability: Not exceed FS ±2%
4.Stability: Not exceed FS ±2%/h
5.Resolution: 0.1 Rb
6.Environmental condition: temperature: 0C~40C
Relative humidity: 20%-80%
Air pressure: 70~105kPa
power: AC 220V±10%;50Hz
7.Preheat time: 5min
8.Sampling system:
swept volume: 330ml±15ml
swept actuation time: 1.4S±0.2S
tightness of extracting pump: The air infiltration capacity is not exceed 15ml in one minute.
filter specification: width:40mm,thickness0.18mm
Equivalent pore diameter: 45um
air permeability :3000ml/cm2.min, brightness: 85%
Sampling tube: cylinder: 5mm, length: 5m.
9.Weight: 18kg
|